??????? - 考慮指定熱釋放速率曲線在不同的建筑物中的情況。
??????? - 無死角出口設計。
??????? - 設計出口具有足夠?qū)挼淖呃?，防火門和樓梯保護的高層建筑。
??????? -區別設計室內和走廊的結構。
??????? 在消防裝置的部分應通過增強NFPA-FSES 4個消防安全參數，但分別賦予不同的分值：
??????? - 自動噴水滅火系統。
??????? - 消防報警器。
??????? - 煙霧探測系統。
??????? - 煙控制。
??????? 并包括以下新的消防裝置：
??????? - 消防栓及軟管卷盤系統。
??????? - 應急照明系統。
??????? - 出口標示。
??????? - 緊急供電系統。
??????? - 滅火器。
??????? 5 消防安全管理
??????? 消防安全管理應加強尋求批準具有等效設計的建筑，或通過代碼升級他們的消防安全設施。在這里，消防安全計劃應該包括[36-41]：
??????? 維護計劃。
??????? 為住宅高層建筑居住者和管理人員，及非住宅樓宇或大屋苑的居民制定具有較強的管理團隊性質的培訓計劃。
??????? 火災預防計劃。
??????? 管理人員基本消防行動方案。
??????? 消防安全管理要素應參照缺失規定單獨制定一定的建筑防火安全要求。例如，有效的內部管理的新要求規定，如果走廊寬度不滿足1.2米，應確保沒有雜物被放置在樓道里。它是一種常見的做法，因為雜物將阻斷出口通道。
??????? 6 結論
??????? 在香港的商業用房[24]中使用NFPA-FSES[8,9]的可能性需要進一步討論[28]。討論可以遵循以下幾點：
??????? 充分考慮出口的進入和出口設計是非常重要的。應該精心設計疏散模式。
??????? 提供灑水車，消防報警，煙霧探測系統，煙霧控制將改善消防安全。
??????? 接受替代設計。如果能夠證明等效的系統可以滿足績效[15-22]的要求。
??????? 但是，這種方法只是商業用房消防安全的一個起點。新設計的建筑可以按照類似的方法。對于既有建筑[23]，評估結果將提供關于如何為卡拉OK[26,27]制定消防安全指導管理[36-41]。本文的討論是參考當?shù)氐南来a。
??????? NFPA-FSES的概念是值得考慮和遵循的，但需要考慮到不同特色的特殊建筑物具有不同的消防安全參數，并且需要考慮到香港高層建筑的龐大數量和密度。已經確定的消防安全參數和分數擴展[10]建議可以作為當?shù)亟ㄖ袠I(yè)進行更長期研究的參考。
???????
??????? 致謝
??????? 該項目由密集城市先進建筑技術戰略發展項目資助：消防安全工程應急賬戶號碼1 - A038。
???????
??????? 參考文獻
??????? 1. R.W. Bukowski and V. Babrauskas, “Developing rational, performance-based fire safety requirements in model building codes”, Fire and Materials, Vol. 19, No. 2, pp. 173-191 (1994).
??????? 2. H.E. Nelson and A.J. Shibe, “System for fire safety evaluation for multifamily housing”, NBSIR 82- 2562, National Bureau of Standards, Gaithersburg, MD (1982).
??????? 3. H.E. Nelson and A.J. Shibe, “System for fire safety evaluation of health care facilities”, NBSIR 78- 1555-1, pp. 90-114, National Bureau of Standards, Gaithersburg, MD (1980).
??????? 4. H.E. Nelson, B.M. Levin, A.J. Shibe, N.E. Groner, R.L. Paulsen, D.M. Alvord and S.D. Thorne, “Fire safety evaluation systems for board and care homes”, NBSIR 83-2659, National Bureau of Standards, Gaithersburg, MD (1983).
??????? 5. H.E. Nelson, A.J. Shibe, B.M. Levin, S.D. Thorne and L.Y. Cooper, “Fire safety evaluation system for national park service overnight accommodations”, NBSIR 84-2896, National Bureau of Standards, Gaithersburg, MD (1984).
??????? 6. H.E. Nelson and A.J. Shibe, “Development of a fire evaluation system for detention and correctional occupancies”, NBSIR 84-2976, National Bureau of Standards, Gaithersburg, MD (1985).
??????? 7. H.E. Nelson, “Fire safety evaluation system for NASA office/laboratory buildings”, NBSIR 86- 3404, National Bureau of Standards, Gaithersburg, MD (1986).
??????? 8. NFPA-101, Life Safety Code, National Fire Protection Association, Quincy, Massachusetts, USA (1994).
??????? 9. NFPA-101A, Guide on alternative approaches to life safety, National Fire Protection Association, Quincy, Massachusetts, USA (1995).
??????? 10. J.M. Watts, Jr., “Analysis of the NFPA Fire Safety Evaluation System for Business Occupancies”, National Fire Protection Association - Fire Technology, Vol. 33, No. 3, pp. 276-282 (1997).
??????? 11. Code of Practice for the Provision of Means of Access for Firefighting and Rescue, Buildings Department, Hong Kong (1995).
??????? 12. Code of Practice for Fire Resisting Construction, Buildings Department, Hong Kong (1996).
??????? 13. Code of Practice for the Provision of Means of Escape In Case of Fire, Buildings Department, Hong Kong (1996).
??????? 14. Codes of Practice for Minimum Fire Service Installations and Equipment and Inspection and Testing of Installations and Equipment, Fire Services Department, Hong Kong Special Administrative Region (1998).
??????? 15. Guide to fire engineering approach, Practice note for authorized persons and registered structural engineers PNAP 204, Buildings Department, Hong Kong, May (1998).
??????? 16. W.K. Chow, “A preliminary discussion on engineering performance-based fire codes in the Hong Kong Special Administrative Region”, International Journal on Engineering Performance Based Fire Codes, Vol. 1, No. 1, pp. 1-10 (1999).
??????? 17. “NFPA's Future in Performance-Based Codes and Standards”, Report of the NFPA In-House Task Group, National Fire Protection Association, Quincy, Ma, USA (1995).
??????? 18. Fire Engineering Guidelines, 1st edition, Fire Codes Reform Centre Ltd., Sydney, NSW, Australia (1996).
??????? 19. CIBSE Guide E 1997: Fire Engineering, The Chartered Institution of Building Services Engineers, London, UK (1997).
??????? 20. G.V. Hadjisophocleous, N. Benichou and A.S. Tamim, “Literature review of performance-based fire codes and design environment”, Journal of Fire Protection Engineering, Vol. 9, No. 1, pp. 12-40, (1998).
??????? 21. A.H. Buchanan, “Implementation of performancebased fire codes”, Fire Safety Journal, Vol. 32, No. 4, pp. 377-383 (1999).
??????? 22. BS ISO/TR 13387:1999: Fire safety engineering, British Standards Institution, London, UK (1999).
??????? 23. Consultation paper on fire safety improvements to old commercial buildings, Security Branch, Government Secretariat, Hong Kong, May (1997).
??????? 24. Business Registration Certificate, Business Registration Ordinance, Chapter 310, Laws of Hong Kong, Business Registration Office, Inland Revenue Department, Hong Kong Special Administrative Region, 30 April (1999).
??????? 25. S.M. Lo, “A fire safety assessment system for existing buildings”, Fire Technology, Vol. 35, No. 2, pp. 131-152 (1999).
??????? 26. W.K. Chow and G.C.H. Lui, “A fire safety ranking system for karaoke establishments in the Hong Kong Special Administrative Region”, Journal of Fire Sciences - Accepted to publish (2000).
??????? 27. W.K. Chow and Gigi C.H. Lui, “A proposed fire safety ranking system for karaoke establishments and its comparison with the NFPA - Fire safety evaluation system”, Building and Environment - Accepted to publish (2001).
??????? 28. W.K. Chow and Gigi C.H. Lui, “On evaluating building fire safety for business occupancies”, International Journal on Engineering PerformanceBased Fire Codes, Vol. 3, No. 1, pp. 16-24 (2001).
??????? 29. NFPA-220, Standard on types of building construction, National Fire Protection Association, Quincy, Massachusetts, USA (1991).
??????? 30. ASTM E 136, Standard test method for behaviour of materials in a vertical tube furnace at 750°C, American Society for Testing and Materials, West Conshohocken, Pennsylvania, USA (1999).
??????? 31. BS 476 Part 22, Fire tests on building materials and structures - Methods for determination of the fire resistance of non-loadbearing elements of construction, British Standards Institution, London, UK (1987).
??????? 32. M. Law, “A relationship between fire grading and building design and contents”, Fire Research Note No. 877, Fire Research Station, Borehamwood, UK (1971).
??????? 33. W.K. Chow, “FSD Circular Letter No. 13/88: A Comment”, The Hong Kong Engineer, November, p. 19 (1989).
??????? 34. NFPA-255, Standard method of test of surface burning characteristics of building materials, National Fire Protection Association, Quincy, Massachusetts, USA (1990).
??????? 35. BS 476 Part 7, Fire tests on building materials and structures - Method of test to determine the classification of the surface spread of flame of products, British Standards Institution, London, UK (1997).
??????? 36. H.L. Malhotra, “Fire safety in buildings”, Building Research Establishment Report, Department of the Environment, Building Research Establishment, Fire Research Station, Borehamwood, Herts, WD6 2BL, UK (1987).
??????? 37. Design principles of fire safety, Bickerdike Allen Partners, Her Majesty Stationery Office, London, UK (1996).
??????? 38. W. Dailey, A guide to fire safety management, Perpetuity Press, UK (2000).
??????? 39. NFPA 550, Guide to the fire safety concepts tree, National Fire Protection Association, Quincy, Ma, USA (1995).
??????? 40. D.E. Della-Giustina, The fire safety management handbook, 2nd edition, American Society of Safety Engineers, Des Plaines, Illinois, USA (1999).
??????? 41. W.K. Chow, “Review on fire safety management and application to Hong Kong”, International Journal on Engineering Performance-Based Fire Codes, Vol. 3, No. 1, pp. 52-58 (2001).
??????? 42. ISO 9705, Fire tests - Full-scale room test for surface products, International Standards Organisation (ISO), Geneva, Switzerland (1993).
??????? 43. V. Babrauskas and S.J. Grayson, Heat release in fires, Elsevier Applied Science, London, UK (1992).
???????